NEW ISOCheck Added To The Product Range!

This Is The ISOCheck EBS Plus Tool. Designed By Our In House Tech Team The ISOCheck Tool Will Test The ISO7638 Socket On The Rear Of A Tractor Unit. Trucks first used on the road on or after 1 May 2002 must be fitted with ISO 7638 connections. If a truck is fitted with an Electronic Braking System (EBS) and is towing a trailer fitted with EBS then a 7 core cable must be used. Trucks & Trailers with a defective EBS system (especially double decker trailers) would vastly increase the chances of roll over or jack-knife. The simple & quick procedure of attaching the tester to the ISO7638 Truck Susie Socket and turning on the ignition will confirm Green for Good Or Red for Fault! So when the truck is returned to the road all information from the trucks ISO7638 can be trusted & proven. Also, if the RED light indicates a fault, ISOCheck EBS-Plus will indicate which pin is at fault. Once the initial power test is complete with a RED fault light, ISOCheck will then go into diagnostic mode and flash a 1 to 7 count sequence in relation to the faulty pin. ISOCheck EBS will test all electronic braking systems, Wabco, Knorr Bremse and Haldex, covering the differences between the early generations and the latest. So for truck manufacturer workshops to large haulage fleets to small independent commercial repairers, ISOCheck Is An Ideal Tool! Inspection Sheet Check Of The ISO Brake Line Creates A Safety Brake Check. Contact aide automotive on info@aideautomotive.com or 0115 8456471 to purchase or enquire further.