Menu

Loading Bay Scissor Lift Table, Split Level Goods Lift

11-09-2018

Loading Bay Scissor Lift Table - Split Level Goods Lift 1100mm high mild steel handrail complete with mid rail and 150mm high kick plates mounted along both long sides of the lift platform. These will come complete with sheeted infills. One short end to be fitted with an 1100mm high mild steel single outward opening hinged gate with electrical switch. This will also be in filled. The upper level will be fitted with a similar gate to the platform mounted version but it will be floor mounted. 1 x standard telemechanique controls (one to be positioned at upper level as agreed onsite). 650mm long x 1000mm wide x 80mm high mild steel ramp suitable for mounting along one short end. Installation will include securing down of lift, fitting of ancillary items, and connection of mains power and all electrical systems, testing and commissioning of overall installation. A 3 phase and earth mains electrical supply must be wired to an isolator no further than 3Ms from the location of the installation. This will be required throughout the installation and for the operation of the lift along with 1 phase, 220 Volts for installation power tools. Customer is responsible for ensuring that electrical output supply complies with current I.E.E. Regulations. The delivery vehicle and our installers require free and unobstructed access to the site and area of installation at all times throughout the installation period. There are to be no restrictions to work being able to carry on uninterrupted. For a quotation please contact; Manual Handling Solutions 58, Paige Close, Watlington, King's Lynn, Norfolk PE33 0TQ Tel 01553 811977 sales@manualhandlingsolutions.co.uk http://goodslifts.website/ http://www.goodslifts.website/loading-bay-scissor-lift-table-2/
ENQUIRY FORM

More News

  • Goods Lift Bryant Broadcast Croydon

  • Exxon Mobil Small Archive Storage Goods Lift

  • Goods Lift One Stop Shop Oldbury West Midlands

  • Mezzanine Goods Lift Dartford Kent