13 Tonne Pit Jacking Beam for ATF (AIR)
Product Code: 14790
Majorlift 13 Tonne Air Operated Hydraulic Operating Pit Jacking BeamSupplied as standard with finger guards for CE marking
Other features :
* Minimum Effort Required With Easy Roll Bearing Support Arms
* Painted in Safety Yellow
* Test certificates supplied with all beams
* All equipment covered by 5 Years Warranty
* Supplied with a set of raiser blocks
* Finger guards supplied as standard
PLEASE NOTE:
For pits wider than 1220m a special frame is required. This heavier gauge steel frame carries an additional charge of £130.00.
Twin ram operation – Greater operational stability, efficiency and safety. The rams slide transversely, making precise positioning under the vehicle possible, AND they can be used independently or in tandem, allowing one or both sides of the vehicle to be lifted.
Surface Engineered for a longer, harder working life – All key components in a Majorlift jack now have their working life greatly extended through a patented surface engineering process. This range of treatments develop iron nitride surface compound layers to toughen the surface and resist rust. The nitrogen-enriched zone can improve yield and fatigue strengths by as much as three or fourfold.
Control valves as standard – Precise lowering for optimum safety and working conditions.
Pressure relief valve – Automatically prevents overloading.
Positive mechanical safety lock – Threaded rams and collars greatly enhance operator safety especially against accidental lowering.
Pumps can be either air-powered or hand-operated – Air-operated gives easy and rapid lift; hand gives easy double action pumping.
Quietest Ever Majorlift Pump – The new quieter design of Majorlift pump, built into every air jack – significantly enhances performance and reduces noise as well as further improving operational reliability.
Load bearing supports and spring loaded rollers – A long established Majorlift design for smooth, easy and safe movement along the pit.
• For lifting loaded tri-axle trailers, the 20-tonne model must be used.
• Custom-built beams for unusually shaped pits.
• Test certificates supplied with all beams.
Specifications:
Capacity 13 Tonne
Weight 130kg
Air Pressure – 6 – 8.5 Bar
Air Flow – S. 0.42 cu m/min
Hydraulic Pressure – 193 Bar
* Supplied with a set of raiser blocks
* Finger guards supplied as standard
PLEASE NOTE:
For pits wider than 1220m a special frame is required. This heavier gauge steel frame carries an additional charge of £130.00.
Twin ram operation – Greater operational stability, efficiency and safety. The rams slide transversely, making precise positioning under the vehicle possible, AND they can be used independently or in tandem, allowing one or both sides of the vehicle to be lifted.
Surface Engineered for a longer, harder working life – All key components in a Majorlift jack now have their working life greatly extended through a patented surface engineering process. This range of treatments develop iron nitride surface compound layers to toughen the surface and resist rust. The nitrogen-enriched zone can improve yield and fatigue strengths by as much as three or fourfold.
Control valves as standard – Precise lowering for optimum safety and working conditions.
Pressure relief valve – Automatically prevents overloading.
Positive mechanical safety lock – Threaded rams and collars greatly enhance operator safety especially against accidental lowering.
Pumps can be either air-powered or hand-operated – Air-operated gives easy and rapid lift; hand gives easy double action pumping.
Quietest Ever Majorlift Pump – The new quieter design of Majorlift pump, built into every air jack – significantly enhances performance and reduces noise as well as further improving operational reliability.
Load bearing supports and spring loaded rollers – A long established Majorlift design for smooth, easy and safe movement along the pit.
• For lifting loaded tri-axle trailers, the 20-tonne model must be used.
• Custom-built beams for unusually shaped pits.
• Test certificates supplied with all beams.
Specifications:
Capacity 13 Tonne
Weight 130kg
Air Pressure – 6 – 8.5 Bar
Air Flow – S. 0.42 cu m/min
Hydraulic Pressure – 193 Bar
Visit the Butts of Bawtry website for more information on 13 Tonne Pit Jacking Beam for ATF (AIR)
ENQUIRY FORM
