Truck N Trailer Electronic Brake System Tester

ISOCheck EBS – Electronic Brake System Tester is the latest addition to the ISOCheck product range. Trucks first used on the road on or after 1 May 2002 must be fitted with ISO 7638 connections. If a truck is fitted with an Electronic Braking System (EBS) and is towing a trailer fitted with EBS then a 7 core cable must be used. Like the ISOCheck ABS tester, ISOCheck EBS tests the ISO Socket 7638 Pins 1 to 5 but also tests Pins 6 & 7,”the EBS CAN lines”. ISOCheck EBS has been brought into the modern era with a complete re-design, incorporating the latest electronics with a new vision of software. ISOCheck EBS is available in standard version and also as a premium tester, ISOCheck EBS-Plus will indicate which pin is at fault. Once the initial power test is complete with a RED fault light, ISOCheck will then go into diagnostic mode and flash a 1 to 7 count sequence in relation to the faulty pin. ISOCheck EBS will test all electronic braking systems, Wabco, Knorr Bremse and Haldex, covering the differences between the early generations and the latest. ISOCheck can be used in many ways as the test is simple and easy, use ISOCheck for fault finding by the roadside or as an inspection sheet test within a workshop. ISOCheck really becomes the perfect test tool on a dark wet night, the quick test and the bright (Green) OK / Fault (Red) answer increases test and repair efficiency. ISOCheck can be used as a constant visual aide on any truck and trailer but possibly especially for double decker trailers. Double decker trailers with a defective EBS system would vastly increase the chances of roll over or jack-knife. With ISOCheck in place a driver or depot gateman would be able to see the RED warning light.